Hello! Welcome to Dongguan City Qingfeng Electrical Machinery Co., Ltd. official website!
4dhcpmingchen
Vertical Micro Fine Wire Taping Machine

1.Usage

Applied for micro-fine coaxial wire, fine high frequency data wire( such as HDMI, DP, USB), micro-fine high temperature halogen-free electronic wire, micro-fine twisted wire and parallel wire ,with single/double layer continuous central taping, heating wind heating and take-up action accomplished at the same time.

2.Characteristics

2.1Automatic tension trace device, taping tension keep constant from start to end. Don’t use any artificial adjustment.

2.2 Setting overlap rate on touched screen, taping point is steady while it’s normal work or accelerating and decelerating.

2.2PLC controlled+ Servo double bobbin taping+ Servo capstan+ High frequency spark tester online test+ Micro power pay-off/take-up tension control+ High performance heating tube which is used in heating agglutinate of outer layer heat shrinkage film.

2.4Take-up traversing is adopted shaft-traversing type structure, apace can be set arbitrary.

3.Technical parameters:

Model

Vertical micro-fine double layer taping machine

Inlet wire(mm)

AWG32-AWG42

Drain wire(mm)

φ0.15-φ0.3 (Optional )

Tape material

Small bobbin type of copper foil tape ,aluminum foil tape, cotton paper tape, transparent tape, etc.

 Taping (r/min)

0-2500

Line speed (m/min)

1-20m/min

Machine power

Speed regulation by 1HP servo motor plus servo controller, taping bobbin is linkage with capstan motor.

Taping tension

Taping tension keep constant from start to end. Don’t use any artificial adjustment.

Capstan type

Belt half pressing single wheel, pneumatic type regulate belt

Heating Box

Auto flexible type with Omron temperature controller, the temperature will be controlled within±1°C

Pay off

Counterweight slider tension type active pay off , inverter regulate speed, with wire broken protection device.

Take up

Shaft traversing type take up, without damage during wire traversing, which the distance and gap can be set at will.

 Drain wire bobbin(mm)

φ180X185 /φ300X160 (Optional)

Core wire bobbin(mm)

φ300X160

Take up bobbin(mm)

φ300X160

Up to now our products have been used in
more than 30 countries all over the world.